Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1462 / 1976

H10757
H10758
Width
Inner
Diam.
AB0158
SST
Battery
- SUPPLEMENTAL RESTRAINT SYSTEM FRONT PASSENGER AIRBAG ASSEMBLY
RS-33
1483
Author: Date:
2001 SIENNA (RM787U)
CAUTION:
If a wire harness which is too thin or some other thing is
used to tie down the front passenger airbag assembly it
may be snapped by the shock when the airbag is deployed.
This is highly dangerous. Always use a wire harness for ve-
hicle use which is at least 1.25 mm
2
(0.0019 in
2
).
(2) Passing the wire harnesses through the installation
holes as shown in the illustration.
(3) Position the front passenger airbag assembly in-
side the tire with the airbag deployment side facing
inside.
Tire size: Must exceed the following dimensions-
Width: 185 mm (7.28 in.)
Inner diameter: 360 mm (14.17 in.)
(4)
Wind the wire harness around the tire tightly.
CAUTION:
Make sure that the wire harness is tight. It is very dan-
gerous if looseness in the wire harness results in the
front passenger airbag assembly coming free due to
the shock from the airbag deploying.
Always tie down the front passenger airbag assembly
with the airbag deployment side facing inside.
NOTICE:
The tire will be marked by the airbag deployment, when dis-
posing of the airbag so use a redundant tire.
(c) Check functioning of SST. (See page RS-16 )
SST 09082-00700
(d) Install the SST.
Connect the connector of 2 SST to the front passenger
airbag assembly connector.
SST
09082-00700, 09082-00760
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.