W02044
H01003
AB0118
R13006
AB0119
H01141
→ ←
D Squib
Spiral
Cable
Airbag
Sensor
Assembly
E1
Tc
ACC
ON
or
DTC B0101/14
DLC1
DI-378
-
DIAGNOSTICS
SUPPLEMENTAL RESTRAINT SYSTEM
532
Author:
Date:
2001 SIENNA (RM787U)
4
Check D squib.
PREPARATION:
(a)
Turn ignition switch to LOCK.
(b)
Disconnect negative (-) terminal cable from the battery,
and wait at least for 90 seconds.
(c)
Connect the steering wheel pad connector.
(d)
Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a)
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
(b)
Clear DTC stored in memory.
(See page
(c)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
(d)
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
(e)
Check DTC.
(See page
OK:
DTC B0101/14 is not output.
HINT:
Codes other than code B0101/14 may be output at this time, but
they are not relevant to this check.
NG
Replace steering wheel pad.
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
Содержание RM787U
Страница 736: ...DIAGNOSTICS POWER SLIDE DOOR CONTROL SYSTEM DI 505 659 Author Date 2001 SIENNA RM787U f Repeat the step d and e...
Страница 1619: ...BE0EX 03 I03187 Power Outlet BODY ELECTRICAL POWER OUTLET BE 13 1531 Author Date 2001 SIENNA RM787U POWER OUTLET LOCATION...
Страница 1883: ...AC0951 Stator AIR CONDITIONING COMPRESSOR AND MAGNETIC CLUTCH AC 65 1906 Author Date 2001 SIENNA RM787U c Remove the stator...