Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1472 / 1976

H17016
H17017
Battery
SST
R13455
10 m (33 ft) or more
SST
Battery
H17018
- SUPPLEMENTAL RESTRAINT SYSTEM SIDE AIRBAG ASSEMBLY
RS-43
1493
Author: Date:
2001 SIENNA (RM787U)
(b) Disconnect the side airbag connector.
NOTICE:
When handling the airbag connector, take care not to dam-
age the airbag wire harness.
(c) Install the SST.
(1)
Connect the connectors of the 2 SST to the airbag
connector.
SST 09082-00700, 09082-00750
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
(2) Move the SST at least 10 m (33 ft) away from the
front of the vehicle.
(3) Close all the doors and windows of the vehicle.
NOTICE:
Take care not to damage the SST wire harness.
(4) Connect the SST red clip to the battery positive (+)
terminal and the black clip to the battery negative
(-) terminal.
(d) Deploy the airbag.
(1)
Check that no one is inside the vehicle or within 10
m (33 ft) area around the vehicle.
(2) Press the SST activation switch and deploy the air-
bag.
CAUTION:
The side airbag assembly is very hot when the airbag
is deployed, so leave it alone for at least 30 minutes
after deployment.
Use gloves and safety glasses when handling the
side airbag assembly with the deployed airbag.
Do not apply water, etc. to the side airbag assembly
with the deployed airbag.
Always wash your hands with water after completing
the operation.
When scrapping a vehicle, deploy the airbag and
scrap the vehicle with the side airbag assembly still
installed.