Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 794 / 1976

AB0118
R13006
AB0119
H01072
H09671
H17220
H17573
Squib (LH)
Airbag
Sensor
Assembly
SFL+
E1
SFL-
Tc
ACC
or
DTC B0118/46
ON
→ ←
DLC1
- DIAGNOSTICS SUPPLEMENTAL RESTRAINT SYSTEM
DI-425
579
Author: Date:
2001 SIENNA (RM787U)
3 Check airbag sensor assembly.
PREPARATION:
(a)
Connect the connector to the airbag sensor assembly.
(b) Using a service wire, connect SFL+ and SFL- of the con-
nector (on the side airbag assembly side) between the
side airbag assembly (LH) and the airbag sensor assem-
bly.
(c) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a)
Turn the ignition switch to ACC or ON and wait at least for
20 seconds.
(b) Clear the DTC stored in memory
(See step 5 on page
DI-358 ).
(c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
(e) Check the DTC (See page DI-358 ).
OK:
DTC B0118/46 is not output.
HINT:
Codes other than code B0118/46 may be output at this time, but
they are not relevant to this check.
NG Replace airbag sensor assembly.
OK