Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1797 / 1976

H02675
a
a
B
b - b
A
c - c d - d
b b
d
d
c
c
a - a
B
A
B
A
B
A
C
D
E
F
H02432
BO-72
- BODY SLIDE DOOR GLASS
1749
Author: Date:
2001 SIENNA (RM787U)
7. APPLY ADHESIVE
(a) Cut off the tip of the cartridge nozzle.
Part No. 08850-00801 or equivalent
HINT:
After cutting off the tip, use all adhesive within the time de-
scribed in the table below.
Temperature Tackfree time
35
°
C (95
°
F) 15 minutes
20
°
C (68
°
F) 100 minutes
5
°
C (41
°
F) 8 hours
(b) Load the cartridge into the sealer gun.
(c) Coat the glass with adhesive, as shown.
A: 12.0 mm (0.472 in.)
B: 8.0 mm (0.315 in.)
C: 15.0 mm (0.59 in.)
D: 17.0 mm (0.67 in.)
E: 34.5 mm (1.36 in.)
F: 18.5 mm (0.73 in.)
8. INSTALL GLASS
(a) Install the glass to the door.
(b) Hold the glass in place securely with a protective tape or
equivalent until the adhesive hardens.
NOTICE:
Take care not to drive the vehicle during the time described
in the table below.
Temperature Minimum time prior to driving the vehicle
35
°
C (95
°
F) 1.5 hours
20
°
C (68
°
F) 5 hours
5
°
C (41
°
F) 24 hours
9. INSPECT FOR LEAK AND REPAIR
(a) Conduct a leak test after the hardening time has elapsed.
(b) Seal any leak with sealant.
Part No. 08833-00030 or equivalent
10. INSTALL WINDOW GARNISH
(a) Install the window garnish with the 3 screws.
(b) Install the trim board cover to the slide door panel.