Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1592 / 1976

I03487
GARAGE DOOR
OPENER SWITCH
LEARN MODE
LED
OPERATION
ORIGINAL
TRANSMITTER
PRESSED
ENTER
EXIT
ON
OFF
20 sec
LED flashes
at a rate of 1 Hz
LED flashes at a
rate of 5.6 Hz
PRESSED
ON
OFF
- BODY ELECTRICAL GARAGE DOOR OPENER SYSTEM
BE-143
1661
Author: Date:
2001 SIENNA (RM787U)
New code registration timing chart
If a code can not be registered, observe the following condi-
tions.
HINT:
If the battery of original transmitter is consumed.
Press the switch of the transmitter repeatedly in registra-
tion mode, as some transmitters stop transmitting for 1 to
2 seconds.
This system is not applicable to the garage door opener
which had been made before 1982.
2. CODE DELETION
(a) Press the switches at both ends of garage door opener
simultaneously for 20 seconds.
HINT:
When transferring to deletion mode, LED (red) blinks in 6 Hz
cycle.
(b)
When releasing the switch within 10 seconds after trans-
ferring to deletion mode, all the registered codes will be
erased.
HINT:
Press the switch until blinking in 6 Hz cycle stops, so that the
default code for check is set.