Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1444 / 1976

F03684
Punch
F03685
F02582
- STEERING TILT STEERING COLUMN
SR-19
1415
Author: Date:
2001 SIENNA (RM787U)
(e) Using a punch and a hammer, tap in the pivot pin.
(f) Using a pin punch, stake on 3 places evenly around the
hole as shown in the illustration.
7. INSTALL TURN SIGNAL BRACKET
Install the turn signal bracket with the 2 new screws.
Torque: 7.5 N·m (75 kgf·cm, 65 in.·lbf)
HINT:
Set the hole of the bracket and projection of steering column
housing.
8.
INSTALL RELEASE LEVER SPRING
9. INSTALL PARK LOCK CABLE (See page AX-20 )
10. INSTALL SHIFT LEVER HOUSING
Install the shift lever housing with the 3 screws.
Torque: 12 N·m (120 kgf·cm, 9 ft·lbf)
11. INSTALL SHIFT LEVER
Install the shift lever with the screw.
Torque: 12 N·m (120 kgf·cm, 9 ft·lbf)
12. INSTALL COLUMN UPPER BRACKET AND COLUMN
UPPER CLAMP
(a) Install the column upper bracket and column upper clamp
with 2 new tapered-head bolts.
(b) Tighten the 2 tapered-head bolts until the bolt heads
break off.
13. INSTALL IGNITION KEY CYLINDER ILLUMINATION