Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1044 / 1976

A01801
SST
S08028
P18812
SST
A02338
5th
4th
3rd
2nd
6th
1st
- ENGINE MECHANICAL TIMING BELT
EM-23
966
Author: Date:
2001 SIENNA (RM787U)
(b) Align the knock pin on the camshaft with the knock pin
groove of the timing pulley, and slide on the timing pulley.
(c) Using SST, install the pulley bolt.
SST
09960-10010 (09962-01000, 09963-01000)
Torque: 125 N·m (1,300 kgf·cm, 94 ft·lbf)
6. SET NO.1 CYLINDER TO TDC/COMPRESSION
(a) Crankshaft Timing Pulley Position:
Temporarily install the crankshaft pulley bolt to the
crankshaft.
Turn the crankshaft, and align the timing marks of
the crankshaft timing pulley and oil pump body.
(b) Camshaft Timing Pulley Positions:
Using SST, turn the camshaft pulley, align the timing
marks of the timing pulley and No.3 timing belt cover.
SST
09960-10010 (09962-01000, 09963-01000)
7. INSTALL TIMING BELT
NOTICE:
The engine should be cold.
(a)
Remove any oil or water on the pulleys, and keep them
clean.
NOTICE:
Only wipe the pulleys; do not use any cleansing agent.
(b)
Face the front mark on the timing belt forward.
(c) Align the installation mark on the timing belt with the tim-
ing mark of the crankshaft timing pulley.