Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1049 / 1976

P18820
A01800
Clamp
Clamp
P18814
P18808
A01803
- ENGINE MECHANICAL TIMING BELT
EM-17
960
Author: Date:
2001 SIENNA (RM787U)
12. REMOVE NO.1 TIMING BELT COVER
Remove the 4 bolts and timing belt cover.
13.
REMOVE TIMING BELT GUIDE
14. REMOVE NO.2 TIMING BELT COVER
(a) Disconnect the engine wire protector clamps from the
No.2 timing belt cover.
(b) Remove the 5 bolts and timing belt cover.
15. REMOVE RH ENGINE MOUNTING BRACKET
Remove the 2 bolts, nut and mounting bracket.
16. SET NO.1 CYLINDER TO TDC/COMPRESSION
(a) Temporarily install the crankshaft pulley bolt to the crank-
shaft.
(b) Turn the crankshaft, and align the timing marks of the
crankshaft timing pulley and oil pump body.
NOTICE:
Always turn the crankshaft clockwise.
(c) Check that timing marks of the camshaft timing pulleys
and No.3 timing belt cover are aligned.
If not, turn the crankshaft 1 revolution (360
°
).
(d) Remove the crankshaft pulley bolt.