background image

Do not install and/or operate this safety product unless you have read and understand the 

safety information contained in this manual.

1. Proper installation combined with operator training in the use, care, and maintenance of  emergency warning devices

are essential to ensure the safety of you and those you are trying to protect.

2. Exercise caution when working with live electrical connections.

3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high

current arcing, which can cause personal injury and/or severe vehicle damage, including fire.

4. Proper placement and installation are vital to the performance of this warning device. Install this product so that output

performance of the system is maximized and the controls are placed within convenient reach of the operator so that

s/he can operate the system without losing eye contact with the roadway.

5. It is the responsibility of the vehicle operator to ensure during use that all features of this product work correctly. In use,

the vehicle operator should ensure the projection of the warning signal is not blocked by vehicle components (i.e., open

trunks or compartment doors), people, vehicles, or other obstructions.

6. The use of this or any other warning device does not ensure all drivers can or will observe or react to a warning signal.

Never take the right-of-way for granted. It is your responsibility to be sure you can proceed safely before entering an

intersection, driving against traffic, responding at a high rate of speed, walking on or around traffic lanes.

7. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying

all laws regarding warning signal devices. Therefore, the user should check all applicable city, state, and federal laws

and regulations. The manufacturer assumes no liability for any loss resulting from the use of this warning device.

       

      

WARNING!

 

Failure to install or use this product according to manufacturers recommendations may result in property

damage, serious bodily/personal injury, and/or death to you and those you are seeking to protect!

!

Installation Instructions

Camera/Monitor System

Introduction:

ECCO’s Gemineye™ Camera Systems are designed to provide rear of 

the vehicle information that may not be available to a driver relying 

solely on a vehicle’s standard rear view mirror system. A driver using a 

properly installed and maintained rear view camera system in 

conjunction with the standard mirror system, can be alerted to potential 

safety hazards and thus take the appropriate action to prevent an 

accident. This manual provides information about installation, function, 

safety, maintenance, replacement parts, and warranty.

Содержание Gemineye EC2014-C











Отзывы: