Subaru 2009 IMPREZA, Руководство по обслуживанию

Страница: 1054 / 3619

IN(H4DOTC)-15
Turbocharger
INTAKE (INDUCTION)
7. Turbocharger
A: REMOVAL
1) Set the vehicle on a lift.
2) Disconnect the ground cable from battery.
3) Lift up the vehicle.
4) Drain approximately 3.0
2
(3.2 US qt, 2.6 Imp
qt) of coolant. <Ref. to CO(H4DOTC)-14, DRAIN-
ING OF ENGINE COOLANT, REPLACEMENT,
Engine Coolant.>
5) Lower the vehicle.
6) Remove the intercooler. <Ref. to IN(H4DOTC)-
13, REMOVAL, Intercooler.>
7) Remove the center exhaust pipe. <Ref. to
EX(H4DOTC)-8, REMOVAL, Center Exhaust
Pipe.>
8) Lower the vehicle.
9) Remove the joint pipe from the turbocharger.
10) Disconnect the engine coolant hoses from
coolant filler tank.
11) Disconnect the air control hose (A), and loosen
the clamp holding the turbocharger to the intake
duct.
• Except for WRX-SS model
• WRX-SS model
12) Remove the oil inlet pipe from the turbocharg-
er.
• Except for WRX-SS model
• WRX-SS model
IN-00203
IN-02305
IN-02507
IN-02454
(A)
IN-02567
(A)
IN-02455
IN-02568