Subaru 2009 IMPREZA, Руководство по обслуживанию

Страница: 1842 / 3619

CS-25
Select Cable
CONTROL SYSTEMS
4. Select Cable
A: REMOVAL
1) Set the vehicle on a lift.
2) Shift the select lever to “N” range.
3) Disconnect the ground cable from battery.
4) Lift up the vehicle.
5) Remove the front, center and rear exhaust pipes
and the muffler. (Non-turbo model) <Ref. to
EX(H4SO)-6, REMOVAL, Front Exhaust Pipe.>
<Ref. to EX(H4SO)-9, REMOVAL, Center Exhaust
Pipe.> <Ref. to EX(H4SO)-10, REMOVAL, Rear
Exhaust Pipe.> <Ref. to EX(H4SO)-12, REMOV-
AL, Muffler.>
6) Remove the center and rear exhaust pipes and
the muffler. (Turbo model) <Ref. to EX(H4DOTC)-
8, REMOVAL, Center Exhaust Pipe.> <Ref. to
EX(H4DOTC)-13, REMOVAL, Rear Exhaust
Pipe.> <Ref. to EX(H4DOTC)-15, REMOVAL, Muf-
fler.>
7) Remove the heat shield cover.
8) Remove the snap pin and washer from shifter
arm.
9) Remove the plate assembly from the transmis-
sion case.
10) Disconnect the cable from arm assembly.
11) Raise the claw of clamp to remove the cable
from bracket.
12) Remove the select cable from plate assembly.
(A) Shifter arm
(B) Snap pin
(C) Select cable
(D) Bracket
(E) Washer
AT-04522
CS-00954
(C)
(A)
(B)
(E)
(D)
(A) Select cable
(B) Plate ASSY
(A) Adjusting nut
(B) Arm ASSY
(A) Claw
CS-00955
(A) (B)
CS-00278
(B)
(A)
CS-00279
(A)