manualshive.com logo in svg

Sharp MX-C402SC, Руководство по эксплуатации, Страница: 71 / 822

Поделиться
Скачать
Sharp MX-C402SC Скачать руководство пользователя страница 71

1-30

BEFORE USING THE MACHINE

Contents

TRAY SETTINGS FOR TRAY 1 TO 4

LOADING PAPER AND CHANGING THE PAPER SIZE

A maximum of 500 sheets of paper from size 5-1/2" x 8-1/2" to size 8-1/2" x 14" (A5 to A4) can be loaded in trays 1 and 2. 
A maximum of 500 sheets of paper from size 7-1/4" x 10-1/2" to size 8-1/2" x 14" (B5 to A4) can be loaded in trays 3 and 4.

1

Pull out the paper tray.

Gently pull the tray out until it stops.
To load paper, go to step 3. To load a different size of paper, go 
to the next step.

Do not pull hard on the tray. This may cause failure.

2

Adjust the guide plates A and B by 
squeezing their lock levers and sliding 
them to match the vertical and 
horizontal dimensions of the paper to be 
loaded.

The guide plates A and B are slidable. Slide each guide plate 
while squeezing its lock lever.

• Be sure to place the guide to match the size of the paper. If the guide is not placed correctly, paper skewing or 

misfeeds may occur. 

• The loaded paper should not go higher than these protrusions.

3

Fan the paper.

Fan the paper well before loading it. If the paper is not fanned, 
multiple sheets may feed at once and cause a misfeed.

When handling paper, take care not to cut yourself on the edges of the paper.

A

B

Содержание MX-C402SC























































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов