manualshive.com logo in svg

Rohde & Schwarz SMBV100A, Руководство по эксплуатации

Поделиться
Скачать
Rohde & Schwarz SMBV100A Скачать руководство пользователя страница 68

Preparing for Use

R&S

®

SMBV100A

53

Operating Manual 1176.8016.02 ─ 17

Terminating VNC Connection

The remote access via VNC connection can be terminated either on the R&S

 

SMBV or

on the external PC. Terminating the connection does not disable it. It can be estab-
lished again any time. See the notice above concerning unauthorized access due to
VNC connection!

1. Terminate the connection on the R&S

 

SMBV

a) Press the "Windows" key to access the operating system.
b) Right-click on the VNC icon on the task bar and select "Kill all clients".

2. To terminate the connection on the external Linux/Unix PC, close the internet

browser or close the signal generator window.

3. To terminate the connection on the external Windows PC, close the VNC Viewer

program.

The connection is terminated. The color of the VNC icon in the status bar of the
instrument changes.
A message on the external PC indicates the disconnection.

Disabling Remote Access via Ultr@VNC

The VNC connection can be disabled by removing the program on the instrument or by
deactivating the VNC Server service.

1. Remove the VNC program

a) Press the "Windows" key to access the operating system and open the "Add or

Remove Programs" by selecting "Start > Settings > Control Panel > Add or
Remove Programs".

b) Remove the VNC program.

2. Deactivate the VNC Server service

a) Press the "Windows" key to access the operating system and open the "Ser-

vices" by selecting "Start > Settings > Control Panel > Services".

b) Deactivate the VNC Server service.

The connection is disabled, the VNC icon disappears from the task bar of the
instrument.

2.8 LXI Configuration

LXI ("LAN eXtensions for Instrumentation" is an instrumentation platform for measuring
instruments and test systems that is based on standard Ethernet technology. LXI is
intended to be the LAN-based successor to GPIB, combining the advantages of Ether-
net with the simplicity and familiarity of GPIB.

Like GPIB, LXI determines and standardizes the way the instrument behaves in a LAN.
The LXI implementation by the Rohde&Schwarz signal generators allows you to
change certain LAN settings, to reset the LAN connection as well as to identify the
instrument easily.

 

LXI Configuration

Содержание SMBV100A
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды