Rohde & Schwarz SMBV100A, Руководство по эксплуатации

Страница: 660 / 911

Remote Control Commands
R&S
®
SMBV100A
645 Operating Manual 1176.8016.02 ─ 17
Parameters:
<Filename> string
Example: MMEM:CDIR '/var/user/waveform'
sets the default directory.
BB:ARB:WSEG:CONF:SEL 'new'
create configuration file
new.inf_mswv
in the default directory.
Manual operation: See " Load List " on page 418
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CREate <FilenameInput>
Creates a multi segment waveform using the current settings of the specified configu-
ration file. The multi segment waveform is saved into the file defined in the configura-
tion file. The file extension is
*.wv
.
Setting parameters:
<FilenameInput> string
Example: MMEM:CDIR '/var/user/'
sets the default directory
BB:ARB:WSEG:CONF:SEL 'new'
creates the configuration file
new.inf_mswv
in the default
directory.
BB:ARB:WSEG:CONF:SEGM:APP 'arb1.wv'
'includes waveform
arb1.wv
as segment 1 in the configuration
file. The waveform must be available in the default directory.
BB:ARB:WSEG:CONF:OFIL 'multi_wv1'
defines the file name
multi_wv1.wv
for the multi segment
waveform.
BB:ARB:WSEG:CRE '/var/user/new.inf_mswv'
creates multi segment waveform
multi_wv1.wv
using the set-
tings of the configuration file
new.inf_mswv
.
Usage: Setting only
Manual operation: See " Save List " on page 418
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NAME?
This command queries the name of the waveform of the currently output segment of
the multi segment waveform.
Return values:
<Name> string
Example: BB:ARB:WSEG:NAME?
queries the currently output segment.
Usage: Query only
Manual operation: See "Current Segment" on page 394
SOURce Subsystem