manualshive.com logo in svg

Rohde & Schwarz SMBV100A, Руководство по эксплуатации

Поделиться
Скачать
Rohde & Schwarz SMBV100A Скачать руководство пользователя страница 365

Instrument Function

R&S

®

SMBV100A

350

Operating Manual 1176.8016.02 ─ 17

●

A "Cut Off Frequency Shift" = -1 results in a very narrow-band filter

●

Increasing the value up to 1 makes the filter more broad-band

●

By "Cut Off Frequency Shift" = 0, the -3 dB point is at the frequency determined by
the half of the selected "Sample Rate".

User filter

The user filter file must have extention 

*.vaf

 and can be created with the R&S filter

wizard.

The filter wizard (filtwiz) is a tool from Rohde & Schwarz designed for creating filter
files that can be imported on a R&S

 

SMBV. Its main purpose is the conversion of user-

defined finite impulse response (FIR) filters into the filter format (

*.vaf

). Beyond this

filtwiz provides designs for standard filters, e.g. Root Raised Cosine, Gaussian.

The program was developed on a 32-bit Microsoft Windows platform under MATLAB.

For more information, refer to the description "Introduction to "filtwiz" Filter Editor" on
the Rohde&Schwarz Internet page.

5.9.3.5

Conflicting Settings - Custom Digital Mod

Having selected a modulation procedure, not every combination is possible when
selecting the settings for the modulation parameters "Symbol Rate" and "Coding".
These restrictions inevitably give rise to conflicting settings if a parameter is changed
and leads to a prohibited combination.

A conflicting setting is indicated by a message on the Info line in the display. The
R&S

 

SMBV displays the setting entered by the user, but the modulation signal actually

generated does not correspond to this display. A conflict of settings can be triggered if
the user changes a parameter inappropriately. The message disappears as soon as a
conflict-free setting is entered.

A list of the possible settings conflicts and messages in digital modulation can be found
in 

Chapter 9, "Status Information, Error Messages and Troubleshooting"

, 

on page 852.

5.9.3.6

Custom Digital Mod User Interface

 

 

Baseband Signal - Baseband Block

Содержание SMBV100A
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды