![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_32867571080.webp)
Command Reference
R&S
®
ZNB/ZNBT
1080
User Manual 1173.9163.02 ─ 55
Example:
Assume that the current recall set contains two channels num-
bered 1 and 2, respectively, and that sweep segments have
been defined for channel no. 1.
MMEM:STOR:SEGM 1, 'C:\Users\Public\Documents\
Rohde-Schwarz\Vna\SweepSegments\Seg_Ch1.SegList'
Store the sweep segment definition of channel 1 to a sweep
segment file.
MMEM:LOAD:SEGM 2, 'C:\Users\Public\Documents\
Rohde-Schwarz\Vna\SweepSegments\Seg_Ch1.SegList'
Load the previously created sweep segment file and use the
sweep segments for channel 2.
Usage:
Setting only
Manual operation:
See
MMEMory:LOAD:STATe
<Compatibility>, <RecallSetFile>
Loads configuration data from a specified recall set file (
*.znx|*.znxml
) and sets
the analyzer to the corresponding instrument state.
Setting parameters:
<Compatibility>
1 (this value is used for compatibility with the SCPI standard but
is ignored).
<RecallSetFile>
String parameter to specify the absolute or relative path of the
recall set file to be loaded. Relative paths are evaluated relative
to the current directory (see
Example:
MMEM:STOR:STAT 1,'C:\Users\Public\Documents\
Rohde-Schwarz\Vna\RecallSets\Set_0413.znx'
Store the current setup configuration in the file
Set_0413.znx
in the default directory for recall set files.
MMEM:LOAD:STAT 1,'C:\Users\Public\Documents\
Rohde-Schwarz\Vna\RecallSets\Set_0413.znx'
Load the settings stored in
Set_0413.znx
.
Usage:
Setting only
Manual operation:
See
MMEMory:LOAD:TRACe
<DestinationTraceName>, <TraceFile>[,
<SParamOrTraceName>]
Loads trace data from a specified trace file and assigns it to a trace with a specified
name. Traces are created using the
CALCulate<Ch>:PARameter:SDEFine
mand.
SCPI Command Reference