![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_3286757642.webp)
GUI Reference
R&S
®
ZNB/ZNBT
642
User Manual 1173.9163.02 ─ 55
6.15.2.6
Advanced Settings Dialog
The "Advanced Settings" dialog gives full access to the calculation chain of the eye
diagram simulation.
Access:
SYSTEM – [APPLIC] > "TDR" > "Eye Diag" > "Advanced Settings..."
This dialog is available with
option R&S
ZNB/ZNBT-
K20 only.
Controls in the Dialog
●
,
and
allow you to specify the simulated input sig-
nal of the DUT
●
allows you to switch between different transmission (and reflection) paths of
the DUT and to configure its DC properties.
●
allows you to perform signal equalization at the "virtual receiver".
A green LED indicates that the respective building block is active. However the calcula-
tion chain can also be shortened using the
control below the building blocks.
[Slider]
Allows you to shorten the simulation/calculation chain without deactivating the building
blocks at the tail end.
Remote command:
Define Colors...
See
Generator
The "Generator Settings" dialog gives full access to the "virtual" signal generator of the
related eye diagram simulation. Most of the settings are also available in the
Access:
"Generator" button in the
Applic Softtool