![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_32867571323.webp)
Command Reference
R&S
®
ZNB/ZNBT
1323
User Manual 1173.9163.02 ─ 55
SYSTem:COMMunicate:RDEVice:SMATrix<Matr>:RELays:SWITch:COUNt?
For mechanical matrices, this command allows to query the list of switch counts for all
relays (if supported by the matrix).
Suffix:
<Matr>
.
Index of the switch matrix (see
Usage:
Query only
Manual operation:
See
"Configured External Switch Matrices"
SYSTem:COMMunicate:RDEVice:SMATrix<Matr>:SERial?
Returns the serial number of the related switch matrix.
Suffix:
<Matr>
.
Index of the switch matrix (see
If the switch matrix is not part of the RF configuration, the query
returns an "Invalid suffix" error.
Usage:
Query only
Manual operation:
See
8.3.17.2
SYSTem:DATA:MEMory...
These commands allow you to configure memory-mapped trace data transfer. See
Chapter 5.4.3, "Memory-Mapped Trace Data Transfer"
SYSTem:DATA:MEMory:ADD
<TraceName>, <DataFormat>, <NumberOfPoints>
Adds trace <TraceName> to a previously initialized shared memory buffer.
Traces can only be added after the
.
For background information, see
Chapter 5.4.3, "Memory-Mapped Trace Data Trans-
Setting parameters:
<TraceName>
Trace name. Identifies the trace within the active recall set.
<DataFormat>
SDATa | FDATa
The data format of the stored trace values.
SDATa
Unformatted (complex) trace data.
FDATa
Formatted (real-valued) trace data.
<NumberOfPoints>
Number of trace values to be stored.
SCPI Command Reference