Command Reference
R&S
®
ZNB/ZNBT
864
User Manual 1173.9163.02 ─ 55
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Seg>
Segment number
If you want to use a custom formula for a segment, use
CALCulate<Chn>:LIMit:CONTrol[:DATA]
Parameters:
<State>
OFF (0)
The line segment is a straight line, connecting the endpoints
specified in the segment definition.
ON (1)
The line segment is defined by a custom formula. Use
CALCulate<Chn>:LIMit:SEGMent<Seg>:FORMula
ify the formula.
*RST:
OFF
Example:
See
CALCulate<Chn>:LIMit:SEGMent<Seg>:FORMula
Manual operation:
See
CALCulate<Chn>:LIMit:SEGMent<Seg>:INTerpol
<LimLineInterpolation>
"Interpolation" determines whether the limit line segment is interpolated linearly or log-
arithmically. The latter may be more suitable for logarithmic sweeps.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Seg>
Segment number
Parameters:
<LimLineInterpolation>LOGarithmic | LINear
Manual operation:
See
CALCulate<Chn>:LIMit:SEGMent<Seg>:STIMulus:STARt
<FreqPowTime>
CALCulate<Chn>:LIMit:SEGMent<Seg>:STIMulus:STOP
<StimVal>
These commands change the start and stop stimulus values (i.e. the smallest and the
largest stimulus values) of a limit line segment. A segment must be created first to
enable the commands (e.g
ter 5.4.1.1, "Rules for Limit Line Definition"
Tip:
To define the stimulus values of several limit line segments with a single com-
CALCulate<Chn>:LIMit:CONTrol[:DATA]
.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Seg>
Segment number
SCPI Command Reference