Command Reference
R&S
®
ZNB/ZNBT
867
User Manual 1173.9163.02 ─ 55
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<HorizontalPos>
LEFT | MID | RIGHt
Horizontal position
<VerticalPos>
TOP | MID | BOTTom
Vertical position
Example:
See
Manual operation:
See
CALCulate<Chn>:LIMit:TTLout<Pt>[:STATe]
<Boolean>
Switches the TTL pass/fail signals on or off. The signals are applied to the USER
PORT as long as the active trace
<Chn>
is within limits, including the ripple limits.
See
Default values for new traces can be set using
.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Pt>
1 - TTL out pass 1 (pin 13 of USER PORT connector)
2 - TTL out pass 2 (pin 14 of USER PORT connector)
Parameters:
<Boolean>
ON | OFF - TTL output signal on or off.
*RST:
OFF
Example:
*RST; :CALC:LIM:CONT 1 GHZ, 2 GHZ
Define an upper limit line segment in the stimulus range
between 1 GHz and 2 GHz, using default response values.
CALC:LIM:STAT ON; TTL2 ON
Switch the limit check on and activate the TTL out pass 2 signal.
Manual operation:
See
8.3.1.12
CALCulate:MARKer...
The
CALCulate:MARKer...
commands control the marker functions. The com-
mands are device-specific and beyond what is specified in the SCPI subsystem
SOURce:MARKer...
.
CALCulate:MARKer:COUPled[:STATe]
.............................................................................868
................................................................................869
CALCulate:MARKer:FUNCtion:BWIDth:GMCenter
............................................................ 869
CALCulate<Chn>:MARKer[:STATe]:AREA
........................................................................ 870
CALCulate<Chn>:MARKer:DEFault:FORMat
.................................................................... 870
CALCulate<Chn>:MARKer:MPEak:EXCursion
.................................................................. 871
SCPI Command Reference