![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_32867571057.webp)
Command Reference
R&S
®
ZNB/ZNBT
1057
User Manual 1173.9163.02 ─ 55
Example:
See
Manual operation:
See
"All Channels Continuous / All Channels on Hold"
INITiate<Ch>[:IMMediate][:DUMMy]
Starts a new single sweep sequence. This command is available in single sweep mode
only (
OFF
). The data of the last sweep (or previous
sweeps, see
Chapter 9.2.4.3, "Retrieving the Results of Previous Sweeps"
on page 1402) can be read using
CALCulate<Chn>:DATA:NSWeep:FIRSt?
SDATa, <count>
.
Note:
In contrast to all other commands of the analyzer, the
INITiate<Ch>[:IMMediate]...
commands have been implemented for overlap-
Chapter 7.4, "Command Processing"
Suffix:
<Ch>
.
Channel number. If the channel number does not exist the ana-
lyzer returns an error message. If the "ZVR" or "ZVABT" compat-
ibility mode is active and
ALL
is selected, this suffix is ignored.
Example:
See
Usage:
Event
Manual operation:
See
INITiate<Ch>[:IMMediate]:SCOPe
<Scope>
Selects the scope of the single sweep sequence. The setting is applied in single sweep
mode only (
This command is required in compatibility modes only (see
Suffix:
<Ch>
.
Channel number
Parameters:
<Scope>
ALL | SINGle
INITiate<Ch>[:IMMediate][:DUMMy]
sweep in all channels or in the referenced channel
<Ch>
only.
Example:
See
Manual operation:
See
INITiate<Ch>:CONTinuous
<Boolean>
Qualifies whether the analyzer measures in single sweep or in continuous sweep
mode.
SCPI Command Reference