Command Reference
R&S
®
ZNB/ZNBT
840
User Manual 1173.9163.02 ─ 55
Usage:
Event
Options:
R&S
ZNB/ZNBT-K231
Manual operation:
See
"Clear All 1L Measurements/Clear Selected 1L Measure-
CALCulate:FMODel:DELT<Ph_pt>:M1L:CACHe:CLEar:SELected
<String>
If the 1-length method is used (
CALCulate:FMODel:DELT<Ph_pt>:METHod M1L
the VNA firmware builds up a cache of coupon measurements (Touchstone files) in the
DeltaL\1LMeasurementCache
subfolder of the user data folder
C:\Users\Public\Documents\Rohde-Schwarz\Vna
.
This command deletes the selected file from this cache.
Suffix:
<Ph_pt>
.
Physical port number
Setting parameters:
<String>
Path to the Touchstone file, relative to the cache directory.
Usage:
Setting only
Options:
R&S
ZNB/ZNBT-K231
Manual operation:
See
"Clear All 1L Measurements/Clear Selected 1L Measure-
CALCulate:FMODel:DELT<Ph_pt>:M1L:FILename
<String>
CALCulate:FMODel:DELT<Ph_pt>:M2L:FILename
<String>
CALCulate:FMODel:DELT<Ph_pt>:M3L:FILename
<String>
Loads coupon measurement results for the 1st/2nd/3rd line from a
s2p
or
s4p
Touch-
stone file.
Suffix:
<Ph_pt>
.
This suffix is ignored
Parameters:
<String>
Path to the Touchstone file, either absolute or relative to the cur-
rent directory (see
Options:
R&S
ZNB/ZNBT-K231
Manual operation:
See
CALCulate:FMODel:DELT<Ph_pt>:M1L:LENGth
<Length>
CALCulate:FMODel:DELT<Ph_pt>:M2L:LENGth
<Length>
CALCulate:FMODel:DELT<Ph_pt>:M3L:LENGth
<Length>
Specifies the length of the 1st/2nd/3rd line in Delta-L measurements (
late:FMODel:DELT<Ph_pt>:M1L|M2L|M3L:MEASure
).
SCPI Command Reference