GUI Reference
R&S
®
ZNB/ZNBT
718
User Manual 1173.9163.02 ─ 55
Instrument Messages...
Opens the System Configuration dialog with the
you can configure the display of instrument messages as information popups, in partic-
ular the display of remote control command errors.
6.17.4
External Devices Tab
Allows you to set up and configure external power meters, generators and calibration
units and to enable error logging for the current session.
Background information
Refer to the following sections:
●
Chapter 5.7.25, "External Power Meters"
●
Chapter 5.7.26, "External Generators"
●
Chapter 5.5.5, "Automatic Calibration"
6.17.4.1
Controls on the External Devices Tab
The buttons in the "External Devices" panel open the following dialogs:
●
"Power Meters...", see
Chapter 6.17.4.2, "External Power Meters Dialog"
●
Chapter 6.17.4.3, "External Power Meter Config Dia-
This button is active only if at least one external power meter is online (physically
connected, switched on, ready to be used).
●
Chapter 6.17.4.4, "External Generators Dialog"
Switch matrices can be configured on the "External Ports" tab, see
Chapter 6.17.5.5, "Switch Matrix RF
Setup Softtool