![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_32867571209.webp)
Command Reference
R&S
®
ZNB/ZNBT
1209
User Manual 1173.9163.02 ─ 55
Example:
*RST; :CALC:PAR:DEL 'TRC1'
Reset the analyzer and delete the (default) trace for channel no.
1.
SOUR:LPOR1 1,2
Combine the physical ports no. 1 and 2 to define the balanced
(logical) port no. 1.
LPOR1:ZDIF 27, 2
Specify a complex differential mode reference impedance of
27Ω + j * 2Ω for the defined port.
Manual operation:
See
"Single Ended Mode / Common Mode / Differential Mode"
[SENSe<Ch>:]LPORt<LogPt>:ZDEFault[:STATe]
<arg0>
Allows to toggle between default and renormalized reference impedance(s) for logical
port <LogPt>.
Suffix:
<Ch>
.
Channel number
<LogPt>
Logical port number
Parameters:
<arg0>
ON (1): Use default impedance(s)
OFF (0): Use the redefined impedances defined via
[SENSe<Ch>:]PORT<PhyPt>:ZREFerence
or via
[SENSe<Ch>:]LPORt<LogPt>:ZCOMmon
[SENSe<Ch>:]LPORt<LogPt>:ZDIFferent
logical ports
Manual operation:
See
8.3.14.14
[SENSe:]PAE...
The
[SENSe:]PAE...
commands configure the measurement of the Power Added
Efficiency of an active 2-port device.
................................................................................ 1209
[SENSe<Ch>:]PAE:DCINput:SECondary
........................................................................ 1210
..................................................................................1210
.................................................................................1210
.................................................................................1211
..............................................................................................1211
[SENSe<Ch>:]PAE:DCINput:MAIN
<Input>
Selects the first (main) DC INPUT connector for the PAE measurement (used for all
measurement types; see example).
Suffix:
<Ch>
.
Channel number
SCPI Command Reference