![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_3286757503.webp)
GUI Reference
R&S
®
ZNB/ZNBT
503
User Manual 1173.9163.02 ─ 55
Only calibration types supported by METAS VNA Tools are available.
Ports
Selects the test ports to be calibrated.
Note:
Calibration and port de-/activation.
The way the analyzer fimware activates/deactivates ports after a successfull calibration
(system error correction or power calibration) has slightly changed:
●
In all FW releases, calibrated ports that were previously disabled, are automatically
enabled as single-ended logical ports.
●
Starting with FW version 2.10, uncalibrated ports were disabled in the related
channel(s). If only one of the physical ports forming a balanced port was calibrated,
the balanced port was dissolved and only the uncalibrated (single-ended) port was
disabled.
In earlier FW versions there was no such port deactivation mechanism.
●
Since FW version 2.40 an uncalibrated port is only disabled if it is not used by a
measurement, i.e. if it is not required by any trace of the related channel.
Remote command:
The port parameters in many calibration commands define the calibrated ports.
Type
Selects the calibration type.
Remote command:
[SENSe<Ch>:]CORRection:COLLect:METHod:DEFine
<CalName>, MTOSm |
MUOSm | MOSM | MTRL, ...
Cal Softtool