Command Reference
R&S
®
ZNB/ZNBT
1104
User Manual 1173.9163.02 ─ 55
OUTPut<Ch>:UPORt:SEGMent<Seg>:STATe
................................................................. 1104
OUTPut<Ch>:UPORt:SEGMent<Seg>[:VALue]
............................................................... 1105
........................................................................................1106
OUTPut:UPORt:ECBits
<Boolean>
Defines the usage of pins 16 to 19 of the USER PORT connector.
Parameters:
<Boolean>
ON
–
channel bits 4 to 7
OFF
–
drive port 1 to 4
*RST:
ON
Example:
See
Manual operation:
See
OUTPut<Ch>[:STATe]
<Boolean>
Turns the internal source power at all ports and the power of all external generators on
or off.
Suffix:
<Ch>
.
Channel number. This suffix is ignored; the setting is valid for all
channels.
Parameters:
<Boolean>
ON | OFF - switch the power on or off.
*RST:
ON
Example:
OUTP OFF
Turn off the RF source power.
Manual operation:
See
OUTPut<Ch>:UPORt:SEGMent<Seg>:STATe
<Boolean>
Enables or disables segment bits for the sweep segments in channel no.
<Ch>
; see
OUTPut<Ch>:UPORt:SEGMent<Seg>[:VALue]
. The command is valid for segmen-
ted frequency sweep.
Suffix:
<Ch>
.
Channel number.
<Seg>
Sweep segment number. This suffix is ignored; the setting is
valid for all segments.
Parameters:
<Boolean>
ON | OFF - Enables or disables channel bits.
*RST:
OFF
SCPI Command Reference