![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_3286757600.webp)
GUI Reference
R&S
®
ZNB/ZNBT
600
User Manual 1173.9163.02 ─ 55
DC Extrapolation ← Calculations
This setting is only active, if a recent version of the ISD tool (from 2019-12 or later) is
used.
If unchecked (default), the touchstone data of the generated deembedding file reach
down to the start frequency of the instrument sweep. If checked, the ISD tool adds
(extrapolated) S-parameter data for f = 0.
Remote command:
CALCulate:FMODel:ISD<Ph_pt>:DCEXtrapolat
6.13.5.7
SFD Advanced Settings
Allows you to specify advanced parameters for the SFD tool.
2x Thru Port Ordering
Tells the SFD tool about the port ordering of the 2x Thru test coupon
●
"Ports 1&3 on Left" (default): odd ports are on the left and even ports are on the
right
●
"Ports 1&2 on Left" ports 1 to N are on the left and ports N+1 to 2·N are on the
right
Remote command:
CALCulate:FMODel:SFD<Ph_pt>:DIFFcfg
Total Port Ordering
Tells the SFD tool about the port ordering of the Test Fixture
●
"Ports 1&3 on Left" (default): odd ports are on the left and even ports are on the
right
●
"Ports 1&2 on Left" ports 1 to N are on the left and ports N+1 to 2·N are on the
right
Remote command:
CALCulate:FMODel:SFD<Ph_pt>:TOTaldiffcfg
Offset Embed Softtool