![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_3286757716.webp)
GUI Reference
R&S
®
ZNB/ZNBT
716
User Manual 1173.9163.02 ─ 55
Remote command:
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
SYSTem:COMMunicate:GPIB[:SELF]:DCLear:SUPPress
Remote Language
Selects the syntax of the R&S
ZNB/ZNBT's instrument control commands.
●
The DEFAULT language corresponds to the commands reported in this documen-
tation; see
Chapter 8.3, "SCPI Command Reference"
●
The ZVABT language ensures compatibility with network analyzers of the R&S
ZVA/B/T family. E.g., compared to the DEFAULT language, the command set does
not include
INITiate:CONTinuous:ALL
and
INITiate[:IMMediate]:ALL
.
The function of
INITiate:CONTinuous
and
INITiate[:IMMediate][:DUMMy]
is modified; refer to the remote control docu-
Chapter 8.3.8, "INITiate Commands"
●
The ZVR language ensures compatibility with network analyzers of the R&S ZVR
family. See also
Chapter 8.4, "R&S ZVR/ZVABT Compatible Commands"
●
PNA, ENA, HP8510, HP8720, HP8753 ... denote command sets for network ana-
lyzers from other instruments or manufacturers.
Note:
Remote languages other than DEFAULT are intended for remote control of the
analyzer. A mixed approach, with part of the instrument configuration defined via the
GUI, is possible but can cause unexpected results in some instances.
Remote command:
Define *IDN + *OPT...
Defines a format for the ID string and the option string of the analyzer. The default
strings are automatically adjusted to the selected "Remote Language". The strings can
be queried via
*IDN?
and
*OPT?
, respectively.
●
If the DEFAULT language is activated, the factory ID string
Rohde&Schwarz,ZNB<Max. Freq>-<Ports>Port,<Order and Serial No>,<FW_Ver-
sion>
(e.g.
Rohde-Schwarz,ZNB8-2Port,131160104212345,1.10.05
) is set. The
option string is a comma-separated list of all installed software and hardware
options. The bit order for transferred binary data is swapped (
FORMat:BORDer
SWAPped
).
●
If the PNA language is activated, Agilent-compatible ID and option strings are set.
The bit order for transferred binary data is normal.
●
If one of the "HP xxxx" languages is activated, "HP xxxx"-compatible ID and option
strings are set. Binary data is transferred in a device-specific bit order, however,
the bit order can be changed using "HP xxxx"-specific commands.
The ID and option strings can be changed or reset to the R&S factory ID string.
Setup Softtool