Command Reference
R&S
®
ZNB/ZNBT
1171
User Manual 1173.9163.02 ─ 55
Suffix:
<Ch>
.
Channel number of the offset-corrected channel
<PhyPt>
Port number of the analyzer
Parameters:
<Permittivity>
Permittivity
Range:
1 to +1E+6
*RST:
1.00062
Example:
See
[SENSe<Ch>:]CORRection:EDELay<PhyPt>:ELENgth
Manual operation:
See
"Permittivity / Velocity Factor"
[SENSe<Ch>:]CORRection:EDELay<PhyPt>:DISTance
<MechLength>
Defines the offset parameter for test port
<PhyPt>
as a mechanical length.
Suffix:
<Ch>
.
Channel number of the offset-corrected channel
<PhyPt>
Port number of the analyzer
Parameters:
<MechLength>
Mechanical length
Range:
-3.402038 m to +3.4028038 m.
*RST:
0 m
Default unit: m
Example:
See
[SENSe<Ch>:]CORRection:EDELay<PhyPt>:ELENgth
Manual operation:
See
"Delay / Electrical Length / Mech. Length"
[SENSe<Ch>:]CORRection:EDELay<PhyPt>:ELENgth
<ElecLength>
Defines the offset parameter for test port
<PhyPt>
as an electrical length.
Suffix:
<Ch>
.
Channel number of the offset-corrected channel
<PhyPt>
Port number of the analyzer
Parameters:
<ElecLength>
Electrical length
Range:
-1E+9 m to +1E+9 m.
Increment: 1 mm
*RST:
0 m
Default unit: m
SCPI Command Reference