![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_3286757268.webp)
GUI Reference
R&S
®
ZNB/ZNBT
268
User Manual 1173.9163.02 ─ 55
Remote command:
CALCulate<Ch>:PARameter:MEASure
"<Trace_Name>", "<Ratio>"
CALCulate<Ch>:PARameter:SDEFine
"<Trace_Name>", "<Ratio>"
Detector
Selects the algorithm that is used to calculate the results points from the raw measure-
ment data.
For details refer to
Chapter 5.3.5.3, "Detector Settings"
Remote command:
CALCulate<Ch>:PARameter:MEASure
CALCulate<Ch>:PARameter:SDEFine
[SENSe<Ch>:]SWEep:DETector:TIME
6.2.3
Wave Tab
Selects wave quantities as measured quantities.
Background information
Refer to
Chapter 5.3.5, "Wave Quantities and Ratios"
6.2.3.1
Controls on the Wave Tab
The "More Wave Quantities..." button opens the
dialog which
allows to select an arbitrary
, e.g. for different source ports or higher port
numbers.
a<i> Source Port <i>, b<j> Source Port <i>
Selects one of the standard 2-port
i
, b
j
for different source ports.
The predefined wave quantities are obtained with different source ports. "a1 Source
Port 1", "b1 Source Port 1" and "b1 Source Port 2" are measured at Port 1 of the ana-
lyzer. "a2 Source Port 2, b2 Source Port 1" and "b2 Source Port 2" are measured at
Port 2 of the analyzer.
Meas Softtool