![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_3286757514.webp)
GUI Reference
R&S
®
ZNB/ZNBT
514
User Manual 1173.9163.02 ─ 55
If the R&S
ZNB is equipped with
variant 02
of the extension board, a slightly different
user interface is shown. The "Measurement" columns are hidden and the remaining
content of the RFFE and GPIO tab are presented on a single "Control" tab.
Background information
Refer to
Chapter 5.7.18, "RFFE GPIO Interface"
For more details about the voltage range, clock frequency ranges and their steps sizes,
refer to
Chapter 11.3.5, "RFFE - GPIO Interface "
RFFE Tab
The "RFFE" tab is divided into two parts:
●
The upper part gives access to the RFFE interface settings and allows manual
command execution and result display (see
"Basic RFFE Interface Settings and
●
The lower part allows you to define and apply test voltages and to execute voltage
and current measurements on the RFFE pins (see
The "Set" button activates the "Output Voltage" and "Range" ("Shunt" resistance) set-
tings. The "Meas" button starts the voltage and current measurements.
Channel Config Softtool