![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_3286757796.webp)
Command Reference
R&S
®
ZNB/ZNBT
796
User Manual 1173.9163.02 ─ 55
Parameters:
<Weight>
Weight relative to the "Cursor" tap
*RST:
0 dB
Default unit: dB
Options:
R&S
ZNB/ZNBT-K20
Manual operation:
See
CALCulate<Chn>:EYE:EMPHasis:CURSor:PRE
<Weight>
Sets the weight of the pre-cursor tap for the pre-emphasis FIR filter in the calculation
chain of the related eye diagram.
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
Emphasis in the generator simulation for eye diagram measurements is enabled using
CALCulate<Chn>:EYE:EMPHasis:STATe
.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Weight>
Weight relative to the "Cursor" tap
*RST:
0 dB
Default unit: dB
Options:
R&S
ZNB/ZNBT-K20
Manual operation:
See
CALCulate<Chn>:EYE:EMPHasis:STATe
<Boolean>
Activates/deactivates pre-emphasis in the calculation chain of the related eye diagram.
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Boolean>
*RST:
OFF
Options:
R&S
ZNB/ZNBT-K20
Manual operation:
See
CALCulate<Chn>:EYE:EQUalization:CTLE:DC
<DC Gain>
Specifies the DC gain of the CTLE (a two-pole filter with single zero) at the receiver
simulation of the related eye diagram.
SCPI Command Reference