![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_32867571300.webp)
Command Reference
R&S
®
ZNB/ZNBT
1300
User Manual 1173.9163.02 ─ 55
STATus:QUEStionable:PTRansition
<BitPattern>
STATus:QUEStionable:INTegrity:PTRansition
<BitPattern>
STATus:QUEStionable:INTegrity:HARDware:PTRansition
<BitPattern>
STATus:QUEStionable:LIMit<Lev>:PTRansition
<BitPattern>
Configures the positive transition filters of the
QUEStionable...
status registers. If a
bit is set, a 0 to 1 transition in the corresponding bit of the associated condition register
causes a 1 to be written in the associated bit of the corresponding event register.
See also
Chapter 7.5.5, "Reset Values of the Status Reporting System"
Suffix:
<Lev>
.
Selects one of the two
QUEStionable:LIMit
registers; see
"STATus:QUEStionable:LIMit<1|2>"
Parameters:
<BitPattern>
Range:
0 to 65535 (decimal representation)
*RST:
n/a
Example:
STAT:QUES:LIM2:PTR 6
Set bits no. 1 and 2 of the
QUEStionable:LIMit2:PTRansition
register
STATus:QUEue[:NEXT]?
Queries and at the same time deletes the oldest entry in the error queue. Operation is
identical to that of
The entry consists of an error number and a short description of the error. Positive
error numbers are instrument-dependent. Negative error numbers are reserved by the
SCPI standard; see section
Chapter 10, "Error Messages and Troubleshooting"
Example:
STAT:QUE?
Query the oldest entry in the error queue.
0,"No error"
is
returned if the error queue is empty.
Usage:
Query only
8.3.17
SYSTem Commands
The
SYSTem...
commands provide functions that are not related to instrument perfor-
mance, such as functions for general housekeeping and functions related to global
configurations.
8.3.17.1
SYSTem:COMMunicate...
The
SYSTem:COMMunicate...
commands provide remote control settings and con-
figure remote (external) devices controlled by the R&S
ZNB/ZNBT.
SCPI Command Reference