![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_3286757843.webp)
Command Reference
R&S
®
ZNB/ZNBT
843
User Manual 1173.9163.02 ─ 55
CALCulate:FMODel:DELT<Ph_pt>:RUN
Runs the AITT-DL tool with the collected measurement data and the configured Delta-L
settings.
Suffix:
<Ph_pt>
.
This suffix is ignored
Usage:
Event
Options:
R&S
ZNB/ZNBT-K231
Manual operation:
See
CALCulate:FMODel:DELT<Ph_pt>:SWEep:CONTrol
<SweepControl>
Tells the firmware to use either default values for frequency step size and IF band-
width, or the settings of the active channel for the Delta-L measurement.
The resulting frequency step size and IF bandwidth can be queried using
FMODel:DELT<Ph_pt>:SWEep:CONTrol:STEP?
FMODel:DELT<Ph_pt>:SWEep:CONTrol:IFBW?
Suffix:
<Ph_pt>
.
This suffix is ignored
Parameters:
<SweepControl>
DEFault | CURRent
DEFault
Use the default values of the Delta-L algorithm:
10
MHz frequency step size, 1
kHz IF bandwidth
SweepControl
Use the values of the active channel
Options:
R&S
ZNB/ZNBT-K231
Manual operation:
See
CALCulate:FMODel:DELT<Ph_pt>:SWEep:CONTrol:IFBW?
For the Delta-L measurement, the firmware can either use a default IF bandwidth, or
the active channel setting (see
CALCulate:FMODel:DELT<Ph_pt>:SWEep:
).
This query returns the resulting IF bandwidth.
Suffix:
<Ph_pt>
.
This suffix is ignored
Usage:
Query only
Options:
R&S
ZNB/ZNBT-K231
Manual operation:
See
SCPI Command Reference