![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_3286757883.webp)
Command Reference
R&S
®
ZNB/ZNBT
883
User Manual 1173.9163.02 ─ 55
Example:
Suppose that the active recall set contains an active trace no. 1.
CALC:MARK:REF ON; :CALC:MARK ON
Create the reference marker and marker 1 and assign them to
trace no. 1. The default position of both markers is the center of
the sweep range.
Manual operation:
See
CALCulate<Chn>:MARKer<Mk>:REFerence:FORMat
<OutFormat>
Sets/queries the output format for the (complex) value of the reference marker.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Mk>
This numeric suffix is ignored and may be set to any value.
Parameters:
<OutFormat>
MLINear | MLOGarithmic | PHASe | POLar | GDELay | REAL |
IMAGinary | SWR | LINPhase | LOGPhase | IMPedance |
ADMittance | DEFault | COMPlex | MDB | MLPHase |
MDPHase | MIMPedance | PIMPedance | PADMittance |
MADMittance | MPIMpedance | MPADmittance | INDX
DEFault
means the reference marker is formatted according
the related trace's default marker format (see
CALCulate<Chn>:MARKer:DEFault:FORMat
For the other marker formats, see
on page 96.
*RST:
DEFault
Manual operation:
See
CALCulate<Chn>:MARKer<Mk>:REFerence:MODE
<Mode>
Sets the reference marker to continuous or discrete mode. The marker doesn't have to
be created before (
CALCulate<Chn>:MARKer<Mk>[:STATe]
ON
), the mode can be
assigned in advance.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Mk>
This numeric suffix is ignored and may be set to any value.
Parameters:
<Mode>
CONTinuous | DISCrete
CONTinuous - marker can be positioned on any point of the
trace, and its response values are obtained by interpolation.
DISCrete - marker can be set to discrete sweep points only.
*RST:
CONT
SCPI Command Reference