![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_3286757758.webp)
Remote Control
R&S
®
ZNB/ZNBT
758
User Manual 1173.9163.02 ─ 55
Method
Commands / Example
Assign or query trace name of a trace numbered
<Trc>
CONFigure:TRACe<Trc>:NAME 'ABCD'
CONFigure:TRACe<Trc>:NAME?
(returns '
ABCD
')
Query trace number assigned to a trace named
'ABCD'
CONFigure:TRACe<Trc>:NAME:ID? 'ABCD'
(returns the actual trace number; the trace suffix is
ignored)
Table 7-3: Mixed commands
Method
Commands / Example
Query channel name for a trace referenced by its
trace name
CONFigure:TRACe<Trc>:CHANnel:NAME?
'ABCD' (returns the channel name for trace '
ABCD
';
the trace suffix is ignored)
Query channel number for a trace referenced by its
trace name
CONFigure:TRACe<Trc>:CHANnel:NAME:ID?
'ABCD'
(returns the actual channel number for
trace '
ABCD
'; the trace suffix is ignored)
7.4
Command Processing
The block diagram below shows how commands are serviced in the instrument.
IEC/IEEE bus
Ethernet
Input unit with
input buffer
Command
recognition
Instrument
hardware
Output unit with
output buffer
Instrument settings
database
Status reporting
system
IEC/IEEE bus
Ethernet
The individual components work independently and simultaneously. They communi-
cate with each other with so-called messages.
7.4.1
Input Unit
The input unit receives commands character by character from the controller and col-
lects them in the input buffer. The input unit sends a message to the command recog-
Command Processing