![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_3286757830.webp)
Command Reference
R&S
®
ZNB/ZNBT
830
User Manual 1173.9163.02 ─ 55
CALCulate:FMODel:ISD<Ph_pt>:PORT:SKIP:LEFT
CALCulate:FMODel:ISD<Ph_pt>:PORT:SKIP:NONE
CALCulate:FMODel:ISD<Ph_pt>:PORT:SKIP:RIGHt
Tells the ISD tool which ports (in the measured DUT + Test Fixture file) shall be skip-
ped when the tool is run.
●
...:LEFT
: skip the ports on the left (according to the port order specified using
CALCulate:FMODel:ISD<Ph_pt>:PORT:ORDer
●
...:NONE
: do not skip any ports
●
...:RIGHt
: skip the ports on the right (according to the port order specified using
CALCulate:FMODel:ISD<Ph_pt>:PORT:ORDer
)
Equivalent to setting the
ports_to_skip
batch mode parameter of the ISD tool to -1,
0 or -2, respectively.
Use
CALCulate:FMODel:ISD<Ph_pt>:PORT:SKIP
to define an arbitrary set of
ports to be skipped.
Suffix:
<Ph_pt>
.
This suffix is ignored.
Usage:
Event
Manual operation:
See
CALCulate:FMODel:ISD<Ph_pt>:RUN:RUN
Runs the ISD tool.
Before executing this command, make sure that
●
the test coupon measurement (using
CALCulate:FMODel:ISD<Ph_pt>:COUPon:
otherwise) finished successfully, or the test coupon data were
successfully loaded from file (using
CALCulate:FMODel:ISD<Ph_pt>:COUPon:
●
the measurement of DUT + test fixture (using
The resulting Touchstone files are written to C:\Users\Public\Documents\Rohde-
Schwarz\Vna\Embedding. If result files with the same name already exist, they will be
overwritten.
Suffix:
<Ph_pt>
.
This suffix is ignored.
Example:
See
Chapter 9.2.8, "Fixture Modeling"
Usage:
Event
Manual operation:
See
SCPI Command Reference