![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_3286757043.webp)
Getting Started
R&S
®
ZNB/ZNBT
43
User Manual 1173.9163.02 ─ 55
Input levels, EMC
The maximum input levels and voltages of the input connectors at the front and rear
panel must not be exceeded. Match signals with 50 Ω to comply with EMC directives.
See also
Chapter 4.1.5, "EMI Suppression"
4.2.4
Rear Panel R&S
ZNBT
This section gives an overview of the rear panel controls and connectors of the
R&S
ZNBT.
1
2
12
3 4
5
8
13
11
15
7
6
9
10
14
16
17
Figure 4-5: R&S
ZNBT rear view
Table 4-4: Rear panel connectors available on all instruments
Index
Label
Description
1
(Power
I/O)
Power on/off switch, see
Chapter 4.1.7, "Starting the Analyzer and Shutting Down"
2
(Fuse
holder)
Fuse holder, see
Chapter 11.4.3, "Replacing Fuses"
3
LAN
RJ-45 connector to integrate the instrument to a Local Area Network, primarily for
remote control purposes; see
Chapter 4.1.12.1, "Assigning an IP Address"
See also
Chapter 11.3.2, "LAN Interface"
4
USB /
USB Host
Two additional type A USB 3.0 host connectors; similar functionality as the type A
USB host connectors on the front panel (see
Instrument Tour