![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_3286757438.webp)
GUI Reference
R&S
®
ZNB/ZNBT
438
User Manual 1173.9163.02 ─ 55
Note: Checks during the calculation of correction data
Incompatibilities between the selected calibration type, the standards and the channel
settings can cause the calibration to be inaccurate. The analyzer auto-detects potential
sources of errors and displays appropriate, self-explanatory notice boxes.
Remote command:
[SENSe<Ch>:]CORRection:COLLect:SAVE:SELected[:DUMMy]
[SENSe<Ch>:]CORRection:COLLect:SAVE:SELected:DEFault
[SENSe<Ch>:]CORRection:COLLect:DELete
[SENSe<Ch>:]CORRection:DATA:PARameter<Sfk>?
[SENSe<Ch>:]CORRection:DATA:PARameter<Sfk>:PORT<PhyPt>?
[SENSe<Ch>:]CORRection:DATE?
[SENSe<Chn>:]CORRection:SSTate?
[SENSe<Ch>:]CORRection:STIMulus?
[SENSe<Ch>:]CORRection:STIMulus:PORT<PhyPt>?
6.11.1.6
Calibration Setting Wizard (MultiCal)
and simultaneous manual acquisition of multiple system error corrections.
Access:
CHANNEL – [CAL] > "Start Cal" > "Start... (Manual)"
The wizard proceeds through the following steps:
1.
"Ports and Type":
Allows you to define the system error corrections you want to
perform (test port sets, calibration types).
2.
"Connectors and Cal Kits":
Allows you to define the connector type and gender
of the calibrated ports and to select the appropriate cal kits. If necessary, you can
import a calibration kit.
3.
"Calibration":
Allows you to acquire measurement data for the required ports or
port pairs and the required calibration standards. Calculates the system error cor-
rection data (error terms) from the measurement data and applies the result to the
active channel.
Background and related information
●
The "Multiple Cal in Calibration Wizard" feature is disabled by default and has to be
activated in the
of the "System Config" dialog.
●
Chapter 6.11.1.5, "Calibration Setting Wizard"
information.
Step 1: Ports and Type
The first page of the wizard presents the list of already configured calibrations and
allows you to:
●
"Add"new calibrations
●
"Delete" or "Modify" existing calibrations
Cal Softtool