GUI Reference
R&S
®
ZNB/ZNBT
585
User Manual 1173.9163.02 ─ 55
6.13.3
One Way Loss Tab
Defines loss parameters for each physical port.
Use the complementary dock widget to activate or deactivate length/loss compensation
for selected ports (see
Chapter 6.13.1.2, "Offset Panel"
Background information
Refer to the following sections.
●
Chapter 5.6, "Offset Parameters and De-/Embedding"
●
Chapter 5.6.1.2, "Definition of Loss Parameters "
●
Chapter 5.6.1.4, "Auto Length and Loss"
●
Chapter 5.6.1.5, "Fixture Compensation "
Overview
See
Port
Physical test port of the analyzer. You can define independent loss parameters for all
ports.
Remote command:
The
<PhyPt>
numeric suffix in the
[SENSe<Ch>:]CORRection:...
commands
identifies the physical port.
Loss at DC / Loss at 1st Freq / 1st Freq for Loss
See
"Loss at DC / Loss at 1st Freq / 1st Freq for Loss / Use 2nd Freq / Loss at 2nd
Auto Length and Loss
Determines the length offset and one-way loss parameters for the receive port of the
active trace. See
Chapter 5.6.1.4, "Auto Length and Loss"
Use
to limit the frequency range for the calculation.
Note:
Offset Embed Softtool