![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_3286757845.webp)
Command Reference
R&S
®
ZNB/ZNBT
845
User Manual 1173.9163.02 ─ 55
ON (1)
Use the recommended trace configuration, i.e. display each of
the traces in a separate diagram.
OFF (0)
Display all traces in a single diagram.
Options:
R&S
ZNB/ZNBT-K231
Manual operation:
See
CALCulate:FMODel:EZD...
Commands for
Eazy Deembedding
Chapter 5.7.8, "Eazy De-embedding Based
CALCulate:FMODel:EZD<Ph_pt>:COUPon:MEASure
For a fixture modeling with the Easy De-embedding (EZD) tool, this command starts
the measurement of the symmetrical 2xThru coupon at the active ports (see
CALCulate:FMODel:EZD<Ph_pt>:COUPon[:STATe]
Suffix:
<Ph_pt>
.
This suffix is ignored.
Usage:
Event
Options:
R&S
ZNB/ZNBT-K210
Manual operation:
See
"Measure / Measure Open / Measure Short"
CALCulate:FMODel:EZD<Ph_pt>:COUPon:MEASure:FILename
<String>
For a fixture modeling with the EZD tool, this command loads the coupon properties
from a Touchstone file.
Suffix:
<Ph_pt>
.
This suffix is ignored.
Parameters:
<String>
Path to the Touchstone file, either absolute or relative to the cur-
rent directory (see
Options:
R&S
ZNB/ZNBT-K210
Manual operation:
See
"Load File / 1x Open Preset / 1x Short Preset "
CALCulate:FMODel:EZD<Ph_pt>:COUPon[:STATe]
<Boolean>
For a fixture modeling with the EZD tool, this command allows to specify the ports to
which the test coupon is connected.
This has to be defined before measuring the test coupon (using
).
SCPI Command Reference