![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_3286757824.webp)
Command Reference
R&S
®
ZNB/ZNBT
824
User Manual 1173.9163.02 ─ 55
CALCulate:FMODel:ISD<Ph_pt>:PORT:ORDer
.................................................................829
CALCulate:FMODel:ISD<Ph_pt>:PORT:SKIP
................................................................... 829
CALCulate:FMODel:ISD<Ph_pt>:PORT:SKIP:LEFT
.......................................................... 830
CALCulate:FMODel:ISD<Ph_pt>:PORT:SKIP:NONE
......................................................... 830
CALCulate:FMODel:ISD<Ph_pt>:PORT:SKIP:RIGHt
......................................................... 830
CALCulate:FMODel:ISD<Ph_pt>:RUN:RUN
..................................................................... 830
CALCulate:FMODel:ISD<Ph_pt>:RUN[:STATe]
................................................................. 831
CALCulate:FMODel:ISD<Ph_pt>:SCALe:ATTenuation
....................................................... 831
CALCulate:FMODel:ISD<Ph_pt>:SCALe:FREQuency
....................................................... 831
CALCulate:FMODel:ISD<Ph_pt>:SCALe:FTIMe
................................................................831
CALCulate:FMODel:ISD<Ph_pt>:TRACe:COUPling
.......................................................... 832
CALCulate:FMODel:ISD<Ph_pt>:ATTenuation:BEHavior
<AttenuationBehavior>
Sets/gets the
linear_2x
batch mode parameter of the ISD tool:
●
LINear (parameter value
1
): Used for linear insertion loss of test coupon
●
NONLinear (
2
): Used for non-linear insertion loss of test coupon
●
RESonant (
3
): The 2x thru test coupon will be split and used directly for deembed-
ding.
This option may be more accurate when the fixture and 2x Thru have the same
impedance at every location
Suffix:
<Ph_pt>
.
This suffix is ignored.
Parameters:
<AttenuationBehavior>RESonant | LINear | NONLinear
Manual operation:
See
"Test Coupons > Insertion Loss"
CALCulate:FMODel:ISD<Ph_pt>:COUPon:MEASure
For a fixture modeling with the ISD tool and coupon types SYMMetric2x | OPEN1x |
SHORt1x (see
CALCulate:FMODel:ISD<Ph_pt>:COUPon:TYPE
), this command
starts the measurement of the coupon at the active ports (see
).
Suffix:
<Ph_pt>
.
This suffix is ignored.
Example:
See
Chapter 9.2.8, "Fixture Modeling"
Usage:
Event
Manual operation:
See
"Measure / Measure Open / Measure Short"
CALCulate:FMODel:ISD<Ph_pt>:COUPon:MEASure:FILename
<String>
For a fixture modeling with the ISD tool and coupon types SYMMetric2x | OPEN1x |
SHORt1x (see
CALCulate:FMODel:ISD<Ph_pt>:COUPon:TYPE
), this command
loads the coupon properties from a Touchstone file.
SCPI Command Reference