Command Reference
R&S
®
ZNB/ZNBT
907
User Manual 1173.9163.02 ─ 55
.......................................................................................910
CALCulate<Chn>:RIPPle:RDOMain:FORMat
....................................................................910
CALCulate<Chn>:RIPPle:SEGMent:COUNt?
.................................................................... 911
CALCulate<Chn>:RIPPle:SEGMent<Seg>[:STATe]
............................................................911
CALCulate<Chn>:RIPPle:SEGMent<Seg>:LIMit
............................................................... 912
CALCulate<Chn>:RIPPle:SEGMent<Seg>:RESult?
...........................................................912
CALCulate<Chn>:RIPPle:SEGMent<Seg>:STIMulus:STARt
...............................................913
CALCulate<Chn>:RIPPle:SEGMent<Seg>:STIMulus:STOP
............................................... 913
CALCulate<Chn>:RIPPle:SOUNd[:STATe]
........................................................................914
......................................................................................914
CALCulate<Chn>:RIPPle:STATe:AREA
............................................................................ 914
CALCulate:RIPPle:DISPlay:RESult:ALL[:STATe]
<Enable>
Configures the display of ripple check info fields for the active recall set.
Parameters:
<Enable>
ON - Info fields are displayed for all traces, for which a limit
check is enabled.
OFF - Only the info field for the active trace is displayed (if the
ripple check is enabled for this trace).
*RST:
OFF
Manual operation:
See
CALCulate:RIPPle:FAIL:ALL?
[<RecallSet>]
Returns a 0 or 1 to indicate whether or not the global ripple limit check has failed for at
least one channel in the referenced recall set.
Query parameters:
<RecallSet>
Recall set name; if omitted the active recall set is used
Usage:
Query only
Manual operation:
See
CALCulate<Chn>:RIPPle:CLEar
Resets the limit check results for the ripple test.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Usage:
Event
Manual operation:
See
SCPI Command Reference