![background image](http://html1.mh-extra.com/html/rands/znb/znb_user-manual_3286757382.webp)
GUI Reference
R&S
®
ZNB/ZNBT
382
User Manual 1173.9163.02 ─ 55
The following "Stimulus" settings are also available on the "Power" tab:
●
●
Start Frequency / Stop Frequency / Center Frequency / Span Frequency
Defines the sweep range for non-segmented frequency sweeps.
sweep, setting "Start Frequency" and "Stop Frequency" or "Center Fre-
quency" and "Span Frequency" are alternatives.
only "Start Frequency" and "Stop Frequency" can be set.
Note:
For segmented frequency sweeps the start and stop frequencies and the num-
ber of sweep points are defined per segment. See
Chapter 6.10.2.2, "Define Segments
Remote command:
[SENSe<Ch>:]FREQuency:STARt
[SENSe<Ch>:]FREQuency:STOP
[SENSe<Ch>:]FREQuency:CENTer
[SENSe<Ch>:]FREQuency:SPAN
SYSTem:FREQuency?
(query frequency range of the network analyzer)
Number of Points
Sets the total number of measurement points for
This value can also be set on the "Sweep Params" tab of the "Sweep"softtool (see
Remote command:
Stimulus Softtool