NETAVIS Observer 4.6 User Manual (October 2015)
Page 104 of 204
Center on Click
: A single mouse click somewhere in the view port commands the camera to
center on the mouse click location.
Zooming
: Zooming is available via the mouse wheel: zoom-in (forward scroll) and zoom-out
(backward scroll). The amount of the zoom will be indicated by 3 red dots after the mouse is
released:
Please note:
When PTZ control is enabled, any mouse actions are taken for PTZ control. In
order to control the client-based view port zooming (see
7.2.3 Zooming in a view port and in
archive recordings
on page 77), hold down the
CTRL
key while using the mouse.
Crosshair
: When this mode is enabled, a crosshair for relative control mode is shown in the view
port:
