Maschio EXTREME 266 HTC, Использование и обслуживание

Страница: 56 / 240

ENGLISH
USE AND MAINTENANCE
Page 54 Cod. F07022408
STANDARD ATTACHMENT ADJUSTMENT
Machines exit MASCHIO FIENAGIONE with a "STANDARD" tractor connection.
Adjust the attachment to the following specifications:
•
between PTO shaft end and tow-bar attachment pin hole
axis
A = distance ......................................... 200 mm (0ft 7.87in)
•
between PTO shaft and upper tow-bar surface
B = distance ............. 160÷290 mm (0ft 6.29in÷0ft 11.41in)
•
between ground and upper tow-bar surface
C = minimum distance ........................ 554 mm (1ft 9.81in)
A = 200 mm (0ft 7.87in)
B = 160÷290 mm (0ft 6.29in÷0ft 11.41in)
C = 554 mm (1ft 9.81in)
HIGH ATTACHMENT ADJUSTMENT
It is possible to hook the baler also to tractors with a "HIGH" towing device, within acceptable limits, as shown in
the figure.
To do so, you must adapt the towing eye to attachment "A" of the tractor.
Adjust the high attachment to the following specifications:
•
between PTO shaft end and tow-bar attachment pin hole
axis
A = maximum distance ....................... 200 mm (0ft 7.87in)
•
between PTO shaft and upper tow-bar surface
B = minimum distance ........................ 200 mm (0ft 7.87in)
•
between ground and upper tow-bar surface
C = maximum distance ...................1200 mm (3ft 11.24in)
A max = 200 mm (0ft 7.87in)
B min. = 200 mm (0ft 7.87in)
C = 1200 mm (3ft 11.24in)