Maschio EXTREME 266 HTC, Использование и обслуживание

Страница: 92 / 240

ENGLISH
USE AND MAINTENANCE
Page 90 Cod. F07022408
NET BINDER ADJUSTMENT
The “ICON” control system allows you to set the number of revolutions to be used to wrap the bale.
Further information on modifying the net parameters can be found in the chapter: “ICON CONTROL SYSTEM /
MENU / PROGRAM / PROGRAM SETTINGS”.
WARNING!
DANGER OF GETTING CAUGHT IN MOVING PARTS OF THE MACHINE.
POTENTIAL CRUSHING OR SHEARING OF THE LIMBS.
POTENTIAL SERIOUS INJURIES OR DEATH.
Before carrying out any adjustments and/or maintenance on the net binder:
•
Disengage the PTO.
•
Stop the tractor, remove the keys from the dashboard and wait for all moving parts of the machine to
come to a complete stop.
•
Make sure that the machine is resting firmly on the ground and that it is blocked from any sudden
movements (mechanical parking brake or chocks).
CAUTION!
POTENTIAL CRUSHING OR SHEARING OF THE LIMBS.
POTENTIAL SERIOUS INJURIES OR DEATH.
Be very careful when working near the net binder arm and the blades of the binder
ADJUSTMENT OF THE NET ARM MOVEMENT
On the left side wall is positioned the set screw for adjusting the net arm:
•
Loosen the "d" nut and screw or unscrew the "VR"
adjustment screw, in order to obtain the right
distance of the net arm from the intermediate roller.
NOTE:
•
if you tighten the "VR" screw too much, the arm
could move forward and crash against the roller
during binding.
•
If instead you loosen the "VR" screw too much, the
movement of the arm could be insufficient and then
the net would not be picked up and the bale not
tied.
•
When the right adjustment is obtained, tighten the "d" nut.
VR
d