Maschio EXTREME 266 HTC, Использование и обслуживание

Страница: 142 / 240

ENGLISH
USE AND MAINTENANCE
Page 140 Cod. F07022408
MANUAL MODE
VISUALIZATIONS (page 1)
•
Activates the net stop sensor;
•
Activates the net roll impulse sensor and the relative counter;
•
TYING UNIT MOTOR CONSUMPTION: current absorption, in A.
•
PAGE NO. / TOTAL PAGES;
COMMANDS (page 1)
Press side keys next to the symbol that represents the menu to see the name of the menu for about 2 seconds.
•
The key next to the icon starts the process to change the net roll. During the procedure the operator will
be required to press the keys near to the icon to bring the tying unit at the stroke end inside the chamber;
to replace and load the new net roll. During the next step you have to press the key near the icon to bring
the tying unit at the stroke end in cut position.During both tying unit movements, the operator can stop the
search of stroke ends pressing the key near the icon . At the end of the process is possible to enter the
lenght of the net loaded (by pressing the buttons next to the value of the parameter and entering the new
value) and exit the procedure
•
The side key near the icon allow movement of the tying unit to the cut position; the tying unit moves until
the key is kept pressed.
•
The side key near the icon allow movement of the tying unit inside the chamber ; the tying unit moves
until the key is kept pressed.
Press the key near the icon to activate an automatic test sequence of the movements, which brings the tying
unit to perform all the movements involved in the working cycle, according to the parameters defined in the
program in use; the operator has the possibility to interrupt the sequence by pressing the button next to the icon
or to manually search for cutting points by pressing the button next to the icon .
•
Press the side key near to the icon to access the previous page;
•
Press the side key near to the icon to access the next page;
•
Press the key below the icon to go back to previous menu;
•
Press the key below the icon to directly access the working screen.