Maschio EXTREME 266 HTC, Использование и обслуживание

Страница: 101 / 240

USE AND MAINTENANCE
ENGLISH
Cod. F07022408 Page 99
SHORT, DRY, SMOOTH PRODUCT BALES
In case of obstruction, attempt one of the following:
•
Lift the collector to maximum.
•
Reduce tractor PTO regime.
•
Reduce the density of bales when necessary.
•
Make wider swaths (add as needed).
•
Replace broken collector teeth.
USE OF THE BALER ON CORN STALKS
To prolong the life of collector teeth, cut stalks before pressing.
To increase feeding opening, lower the collector (teeth must not touch the ground).
Increased productivity can be obtained by baling smaller swaths at a faster advancement speed.
Make sure that rated PTO regime is maintained.
USE OF THE BALER WITH SILAGE AND WET PRODUCTS
Always start the bale with the collector centred on the swath.
Before entering onto a swath, reduce engine speed of the tractor to a minimum low. Choose a gear which allows
for advancement speed of 6 to 10 km/h with the PTO at rated regime.
To ensure regular feeding, make sure that the towing bar does not touch the swath.